Track Inspector#

Each track will display its page in the inspector when selected. Depending on the track, the properties shown will be different.

../_images/track-inspector.png

The track inspector#

Track Properties#

Track properties are basic properties that the track has.

../_images/track-properties.png
Track Name

Name of the track. Can be changed by double clicking.

Direct Out

The track that this track routes its output to.

../_images/routing-to-groups.png

Routing an instrument to an audio group#

Instrument

The instrument plugin from this track (only applicable to instrument tracks).

Inputs#

If the track takes input, there will be an input selection section. This is mainly used for Recording.

MIDI Inputs#

../_images/track-inputs.png

MIDI inputs on an instrument track#

Input Device

Device to read MIDI input from

MIDI Channels

MIDI channels to listen to (other channels will be ignored)

Audio Inputs#

../_images/audio-track-inputs.png

Audio inputs on an audio track#

Left Input

Left audio input port to listen to

Right Input

Right audio input port to listen to

Mono toggle

Duplicate the left signal on both channels

Gain knob

Adjust input gain

MIDI FX/Inserts#

These are slots for dropping audio or MIDI effects that will be applied to the signal as it passes through the track.

../_images/midi-fx-inserts.png

MIDI FX and insert slots#

MIDI FX are processed after the input and piano roll events and before the instruments in instrument tracks, or before the inserts in MIDI tracks.

Note

Only MIDI and Instrument tracks support MIDI FX.

Inserts are processed in order. For instrument tracks, the inserts will be added onto the signal coming from the instrument, and for other tracks they will be added on the incoming signal.

Aux Sends#

These are aux sends to other tracks or plugin side-chain inputs. These are generally useful for side-chaining or applying additional effects to channels, such as reverb.

../_images/track-sends.png

The first 6 slots are for pre-fader sends and the last 3 slots are for post-fader sends. The pre-fader slots will send the signal before the fader is processed, and the post-fader slots will send the signal after the fader is applied.

Fader#

The fader section is used to control the volume and stereo balance of a channel.

../_images/track-fader.png

To change the fader or stereo balance amount, click and drag their respective widgets. You can reset them to their default positions with Right click ‣ Reset.

The meter displays the amplitude of the signal in dBFS as it is processed live. The peak value of the signal is also displayed next to the meter for additional reference.

Tip

MIDI faders use MIDI volume CC (currently unimplemented - they let the signal pass through unchanged).

The following controls are available for controlling the signal flow:

Record

Arm the track for recording.

Mute

Mute the track, meaning no signal will be sent to its direct out.

Warning

The track will still be processed, so if you are looking to decrease DSP usage, try disabling the track (or individual plugins) instead.

Solo

Solo the track. If any track is soloed, only the soloed tracks will produce sounds.

Listen

Similar to solo, except it dims the volume of other tracks instead of muting them. The dim amount can be controlled in the Monitor section.

Monitor

Listen to incoming signal when recording (only available on audio tracks).

Signal Flow#

To give a better picture of how the signal flows across the different parts of a track, the signal flow for an instrument track is displayed below.

See also

See the Routing chapter for more info on how Zrythm handles signals.

digraph {
  "Track input" -> "MIDI FX 1" -> "(other MIDI FX in order)" -> "MIDI FX 9" -> "Instrument plugin" [color=red];
  "Piano roll" -> "MIDI FX 1" [color=red];
  "Instrument plugin" -> "Insert 1" -> "(other inserts in order)" -> "Insert 9" [color=blue];
  "Insert 9" -> "Pre-fader (internal)" [color=blue];
  "Pre-fader (internal)" -> "Pre-fader sends" -> "(pre-fader send targets)" [color=blue];
  "Pre-fader (internal)" -> "Fader" [color=blue];
  "Fader" -> "Post-fader sends" -> "(post-fader send targets)" [color=blue];
  "Fader" -> "Track output" [color=blue];
}

Signal flow for an instrument track (red = MIDI signal, blue = audio signal)#

Comments#

User comments. This feature is useful for keeping notes about tracks.

../_images/track-comment.png

Clicking the pencil button will bring up a popup to edit the comment.